Skip to main content
Electronic Theatre Controls Inc

How to Configure Legacy Unison Processor and Rack Type

 

There are several different Unison Legacy processor and rack types, all of which can be configured via the processor menu. If configured improperly, you can see accidental errors or odd functionality, so it is important to make sure these settings are accurate.

In the 'Rack' portion of the menu, you can configure the following parameters:

  • Control: type of processor (the sticker on the right of the processor face should have the correct processor type listed with a filled in diamond)
  • Rack: size of rack
  • Volt: rack voltage
  • Start: first circuit number
  • Sequencing: circuit balance (straight vs balanced)

Steps To Configure Legacy Unison Processor and Rack Type

Unison Processor Hidden Buttons.JPG

  1. Press and hold hidden Initialization Activate Button above the last 'N' on the Unison logo on Unison Processor. Menu will change from "System OK" or "Dimmer Errors" to [STAT].
  2. Press the Arrow Down button until processor displays [RACK].
  3. Press Enter to navigate to the 'control' option.
  4. Press the Up/Down Arrow buttons to select the processor type.
  5. Press Enter to navigate to the 'rack' option.
  6. Press the Up/Down Arrow buttons to select the rack size.
  7. Press Enter to navigate to the 'volt' option (navigates to next page).
  8. Press the Up/Down Arrow buttons to select the voltage.
  9. Press Enter to navigate to the 'start' option (navigates to next page).
  10. Press the Up/Down Arrow buttons to select the starting circuit.
  11. Press Enter to navigate to the 'sequencing' option (navigates to next page).
  12. Press the Up/Down Arrow buttons to select the sequence preference.
  13. Press Enter, you will be prompted to update the rack.
  14. If you are satisfied with your changes, press the Up arrow button to choose [YES] and press Enter.

  • Was this article helpful?