Skip to main content
Electronic Theatre Controls Inc

Using Diagnostics To See Unison Processor DMX or Network Input/Output

  1. Last updated
  2. Save as PDF

Issue

I am concerned that my Unison processor is not outputting/receiving DMX or EDMX (Network) data.

Solution

To view the processor's input/output of DMX or EDMX (Network) values go to the following menu:

  1. [Arch]
  2. [Diagnostics]
  3. [Dimmers]

The menu will appear similar to the one below. 

EiDiEoDo.jpg

The [#] under Dimmer is the dimmer number.

  • Ei is EDMX In
  • Di is DMX In
  • Eo is EDMX Out
  • Do is DMX Out
Note-Icon.png DMX levels on this display are represented as hex values. In this example, DMX out is at 33 of 255, or 13%.
Dashes (--) represent a null value.