Skip to main content

 

Electronic Theatre Controls Inc

Configuring Paradigm To Output UDP Strings To An Eos Family Console

Intent

The goal is to have Paradigm trigger an action inside of the Eos console (i.e. "Go To Cue 1") over the network. Configuring an Eos Family console to receive UDP strings is something an end-user can do, following the steps in the Eos Family Show Control User Manual. The Paradigm side must be programmed by an ETC Authorized Technician. If you need to add or alter the strings which Paradigm is sending to your console please contact your favorite ETC Dealer.

  • Was this article helpful?