Skip to main content
Electronic Theatre Controls Inc

Fixture Model Origin Default by Fixture Type

As of Augment3d Version 1.3.0

Conventional Fixtures

Conventional fixtures have their origin at the expected yoke attachment point of the fixture. This can mean that graphically, the fixture appears to be embedded in the pipe rather than having the yoke hang the fixture down below the pipe when focused.

S4LED.jpg

Strip Fixtures

Strip fixtures have their origin at the center of the strip and in line with the hanging position of the fixture.

linear.jpg

Moving Head Fixtures

Moving head fixtures have their origin at the center of the base of the fixture in line with the hanging position of the fixture. They often have a negative Z hang to focus offset to account for the length of the yoke to the tilt axis of the moving head.

mover.jpg

Moving Mirror Fixtures

Moving mirror fixture support was added in Augment3d version 1.2.1

Moving Mirror fixtures have their origin at the expected yoke attachment point of the fixture. This can mean that graphically, the fixture appears to be embedded in the pipe rather than having the yoke hang the fixture down below the pipe when focused

Moving mirror.JPG

Moving Mirror Accessories 

Moving mirror accessory support was added in Augment3d version 1.3.0.

Moving mirror accessory models have their origin at the front point of the Source 4 fixture model. This point is currently fixed and thus the true origin point of the multi part fixture would be the Source 4 model's origin point.

moving mirror accessory.JPG

 

 

Related Links/References

  • Was this article helpful?