Skip to main content
Electronic Theatre Controls Inc

ColorSource Console Pan and Tilt Control with X/Y Grid

What is it

In software version 2.0.0, we introduced Pan and Tilt control on an X/Y coordinate grid.  This feature can be used for better pan and til control of your fixtures.  You will also see a "nudge" option for use with finer, more finite movements. To use the Pan/Tilt grid, follow the steps below. 

How to use it

  1. Select the channel and navigate to the Parameter Controls.
  2. Tap "Position" twice to change to the second Position page: Pan/Tilt Grid.
  3. tap the grid to move the fixture to that location.  Tap and drag for slower, more precise movements.
    1. You do not need to start your Tap&Drag on the fixture's current location. You can start anywhere in the grid.  The further you move your finger from the start position, the faster the fixture will move.
  4. Select "Nudge" on the right side fo the grid for the most precise Micro movements to fine tune your fixture's positioning.


  • Was this article helpful?