Skip to main content
Electronic Theatre Controls Inc

How To Confirm RDM is Working and You Can See Fixtures from ColorSource Console

  1. Last updated
  2. Save as PDF

Explanation

  • In Patch, the RDM button must be lit green.
  • Fixtures that are seen via RDM will be listed in YELLOW text rather than white.
  • You can tap any fixture with yellow text and tap the 'Identify' button to make the fixture flash. To stop it flashing, tap the 'Identify' button again.
  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    How-to
  2. Tags
    This page has no tags.