Skip to main content
Electronic Theatre Controls Inc

Cannot Connect to Controller After Changing its IP Address

Issue

After changing the IP address of my CueSystem controller I am unable to connect to it in the CueSystem software.

Solution

  1. Once the IP address has been changed on a CueSystem controller, you must manually power the controller off and back on.
  2. Once it is rediscovered, you should be able to successfully connect to the Controller.
  3.  

Related Links/References

  • CueSystem Device Discovery is Not Finding Any Devices <Click Here
  • CueSystem Version Compatibility <Click Here>
  • Was this article helpful?