Skip to main content
Electronic Theatre Controls Inc

AutoMark on an Element or Element 2 Console

Explanation

Auto-Mark is always enabled on the Element and Element 2 console and ETC Puck / ETCnomad running in Element Mode.  This is different than other Eos-Family consoles, where Auto-Mark  can be enabled and disabled in Setup > System > Cue Settings.

You can disable AutoMark on a cue-by-cue basis on the Element.  Select the cue where the Marking lights turn on, then type [cue] [x] {automark off}. 

 

  • Was this article helpful?