Skip to main content
Electronic Theatre Controls Inc

Unparking Recorded Channels in Express

You can unpark all channels that are recorded into a cue, submaster, group or focus point.


Follow the procedure below to unpark the channels in a cue. To unpark channels in a submaster, group or focus point, press the [Sub], [Group] or [Focus Point] key in place of the [Cue] key in step 2 of this procedure.

Keystrokes: Action:
1. Press [Stage]. Selects Stage display
2. Press [S6], Park, [Cue]. Prompt reads:
Group mode - Select cue number to use as group, then press AT to park, or press Release to unpark
3. Press [5] [Rel]. Unparks cue five’s channels

82  Parking focus point channels only takes the current levels in the focus point. It does not create a link to the focus point.

  • Was this article helpful?