Changing Playback Modes on a SmartFade

Symptoms/Issue

• Wanting to change between Full Mode, Two Scene Preset Mode, or DMX Backup Mode on the SmartFade Console

Fix/Solution

1. Ensure the console is powered down, remove the power connector on the back of the console.
2. Hold down the Power (Mode) Button.
3. While continuing to hold down the Power Button, re-apply power.
4. Use the wheel to select between the three different modes and press the Enter (checkmark) button to confirm.

Mode information can be found in the manual linked below on Page 5.

Related Links/References

http://www.etcconnect.com/WorkArea/D...id=10737461050