Skip to main content
Electronic Theatre Controls Inc

Cubase MIDI Settings to Enable MIDI Show Control (MSC)


The information in this post is provided to assist in troubleshooting. Perform work at your own risk. ENSURE ANY POWER FROM DEVICES HAS BEEN DISCONNECTED BEFORE SERVICING ANY EQUIPMENT. If you do not feel comfortable performing the work, please contact us or your local service center. Be aware that ETC and its Affiliates are not responsible for any damage or injury caused by service of our products by anyone other than us or our authorized service providers, and such damage is excluded from the product’s warranty.

To allow MIDI Show Control (MSC) to work with Cubase:

  1. In Cubase, select "Preferences."
  2. Select "MIDI Filters."
  3. Uncheck "System Exclusive" filter.
  • Was this article helpful?