ColorSource CYC is flashing briefly when DMX is present
A ColorSource fixture briefly flashes to white or a color while DMX is applied.
Explanation of Issue
When your ColorSource fixture has a preset active and DMX is applied, the fixture may momentarily think it has lost DMX and revert to the active preset for a fraction of a second before restoring DMX. It can happen with any DMX source applied, and any preset or sequence active in the background. Although the issue is rare, it has been a bug since v1.4.0.
- Deactivate any presets or sequences running in the background by removing DMX, tapping mode to deactivate the preset, then reapplying DMX.
- This is corrected with v1.7.1 software, which was released in December 2018. These fixtures can be updated using UpdaterAtor.