Skip to main content
Electronic Theatre Controls Inc

ColorSource Fixture Displays BRN error code Upon Initial Installation

  1. Last updated
  2. Save as PDF

Symptoms/Issue

I am installing a ColorSource fixtures and when powered up its UI LCD reads 'BRn'.

Description/Explanation of Issue

This is burn mode, a test mode from the factory.

Fix/Solution

The fixture should exit this mode once DMX is applied for the first time. Apply DMX and cycle power to the fixture. If it does not exit burn mode, contact ETC Technical Services.

 

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    Reference
  2. Tags
    This page has no tags.