Skip to main content
Electronic Theatre Controls Inc

ETC One Port Gateways and RDM

Over the years, ETC has made several different versions of the Net3 One Port Gateway. The initial version does not support RDM. Subsequent versions do support RDM.

Gateway Version 1-Net3 Gateway

Net3-Gateway.jpg
  • Manufactured before April 2014- Discontinued
  • Supported Net2 and Net3
  • Identifiable via two status LEDs:
    • Net
    • DMX
  • Current sw version 4.3.2
  • Visible in and configured via:
    • GCE v3.1.1 or newer
    • Net3 Concert v1.1.1 or newer

These Gateways do not support RDM

Gateway Version 2- Net3 DMX/RDM Gateway

Net3-DMX-RDM-Gateway.jpg
  • Manufactured after April 2014- Current product
  • Supports Net3
  • Identifiable via three status LEDs:
    • Power
    • Network
    • DMX
  • Current sw version 6.1
  • Visible in and configured via:
    • Concert v1.1.1 or newer
    • UpdaterAtor v4.3.1 or better

These Gateways Support RDM

Gateway Version 3 - Response DMX/RDM Gateway


Response-DMX-RDM-Gateway.jpg
  • Manufactured beginning March 2015- Current Product
  • Supports Net3
  • Identifiable via three status LEDs:
    • Power
    • Network
    • Data
  • Current sw version-6.0.1
  • Visible in and configured via:
    • Concert v1.1.1 or newer
    • UpdaterAtor v4.3.1 or better

These Gateways Support RDM

  • Was this article helpful?