Skip to main content
Electronic Theatre Controls Inc

UL Wallmount SmartPack ThruPower

Click here for CE SmartPack ThruPower used in Europe and Asia.

SmartPack family is growing to include a 12x10A wall mount model equipped with ThruPower to allow schools, churches, studios, and small theatres to have a smooth transition as they add LED into their traditional tungsten lighting system! SmartPack ThruPower offers a three-position switch for each branch circuit that brings choice of dimmed, relay or hot power output to your fingertips.

Dimmed mode:

In dimmed mode, the pack continues to provide the same quality fades and ease of use you have come to depend on.

Hot Output Mode:

Placing a circuit's mode switch to "ON" completely overrides all incoming control by locking on the air gap relay to bypass the dimmer and choke. This mode is great as a focus tool or for peace of mind preventing the board operator from not accidentally shutting off LED's and other equipment requiring constant power during a performance.

Relay Mode:

Relay mode utilizes the DMX address patched for the circuit to turn on and off the air gap relay. By default, the relay turns on at 1% of control and off at 0% of control. Just as with hot mode, this mode fully bypasses dimming and electronics.

  • Was this article helpful?