Skip to main content
Electronic Theatre Controls Inc

Standard EMAP Jumper Settings

  1. Last updated
  2. Save as PDF
  Correct settings for all jumpers except for those at location J3 (see illustration).
standard_emap_jumper_settings_jumperlocations.png

 EMAP

Jumpers at… Should be…
J5 all on
J6 factory wire wrapped
J7 down
J8 down
J9 down
J10 down
J11 up
J12 down
J14 down or off
J15 up or off
J16 down with 27256 EPROM
up with 27512 EPROM
J17 up
  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    Topic
  2. Tags
    This page has no tags.