Skip to main content
Electronic Theatre Controls Inc

CEM+ screen is flickering, has voltage errors, isn't powering on at all, and/or keeps rebooting.

 

Description/Explanation of Issue

If a CEM+ is in a touring rack or is shipped (like a rental), it can develop these issues.  If the CEM+ is jostled, the power board vibrates in such a way as to slowly pull up the power bridge between the power board and motherboard.

Fix/Solution

  1. Inspect the power bridge between the motherboard and power board to see if it has come loose at all.  Even a little can cause issues.
  2. With your index finger, PUSH down on the power bridge to ensure that it is properly seated.
  3. Instant win!

IMG_20190322_105217310.jpgIMG_20190322_105324424.jpg

IMG_20190322_105336591.jpg

  • Was this article helpful?