Sensor MPE Self-Tests
Dial in test number, press RESET.
Third digit adjusts test speed.
|
Test # |
Function |
|---|---|
|
800 |
Switch Test |
|
810 |
Chase |
|
820 |
Fade All |
|
830 |
Fade One Output |
|
840 |
One Output to Full |
|
850 |
All Outputs to Percent |
| 860 | Airflow/Overtemp Test. set thumbwheel to 005 or 006 after unit has booted into 860 test. 005 is for the overtemp test. 006 is for the airflow test. |
| 863 | Zero Crossing Calibration. All LEDs on piggyback card should be on. |
|
864 |
Phase Calibration. Corresponding LED’s should stay on solid. |
| 866 | Analog/AMX Calibration. P1 is AMX. P2 is for Analog. All led’s should be on for proper calibration at 50%. |