BIOS Settings, Road Hog 3

Accessing the Bios

1. Attach a keyboard to the console and power on the console
2. During the boot process, press and hold the DELETE key on the keyboard
3. When prompted to enter the BIOS password, enter hesipc
   The BIOS setup utility will open

Road Hog 3 has 2 different modetherboards.

AIMB-562

The following changes need to be made to each section of the BIOS in the Road Hog computer when using an AIMB-562 motherboard. After making the changes, press F10 to save the configuration and exit.

Main

• Adjust system time & date
• Legacy Diskette A: Disabled

Advanced

• Chipset
  • Graphics Adapter Priority: PCI Express/Int-VGA
• Onboard Devices Configuration
  • HD Audio Controller: Enabled
  • Onboard PCIEX GbE LAN: Disabled
  • Serial Port1 Address: Disabled
  • Serial Port2 Address: Disabled
  • Parallel Port Address: Disabled

Power

• ACPI 2.0 Support: Yes
• APM Configuration
  • Restore on AC Power Loss: Power On
• Hardware Monitor
  • CPU Fan
    • Profile Mode: Silent Mode

Boot

• Boot Device Priority
  • 1st boot: Hard Drive
  • 2nd boot: Removable Device
  • 3rd boot: USB CD-ROM
• Boot Settings Configuration
  • Quick boot: Enabled
  • Full Screen Logo: Disabled
  • Wait for 'F1' if error: Disabled

ASUS P5B 

The following changes need to be made to each section of the BIOS in the Road Hog computer when using an ASUS P5B motherboard. After making the changes, press F10 to save the configuration and exit.

Main

• Adjust System time & date
• Legacy Diskette A: Disabled

Advanced

• Chipset
  • Northbridge Configuration
    • Initiate Graphics Adapter: PCI/IGD
• Onboard Devices Congifuration
  • HD Audio Controller: Enabled
  • Onboard 1394 Controller: Disabled
  • Onboard PCIE GbE LAN: Disabled
  • JMicron SATA/PATA Controller: Enabled
  • Serial Port1 Address: Disabled
  • Parallel Port Address: Disabled

Power

• ACPI 2.0 Support: Enabled
• APM Configuration
  • Restore on AC Power Loss: Power On
  • Power On by PCI Devices: Disabled
  • Power on By PCIE Devices: Disabled
  • Power on By PS/2 Keyboard: Disabled
• Hardware Monitor
  • Fan Profile: Silent

Boot

• Boot Device Priority
  • 1st boot: CD-ROM
  • 2nd boot: Hard Drive
• Boot Settings Configuration
  • Quick Boot: Enabled
  • Full Screen Logo: Enabled
  • Wait for 'F1' if error: Disabled

More Info:

1. Road Hog 3 bios documents attached here.
2. There were two different motherboards used in RH3. Settings for both are attached below.