Skip to main content
Electronic Theatre Controls Inc

My PLCD or PTS7 Wireless Handheld is not holding a charge

The information in this post is provided to assist in troubleshooting. Perform work at your own risk. ENSURE ANY POWER FROM DEVICES HAS BEEN DISCONNECTED BEFORE SERVICING ANY EQUIPMENT. If you do not feel comfortable performing the work, please contact us or your local service center. Be aware that ETC and its Affiliates are not responsible for any damage or injury caused by service of our products by anyone other than us or our authorized service providers, and such damage is excluded from the product’s warranty.

Symptoms/Issue

My PLCD or PTS7 wireless handheld touchscreen is not holding a charge

Description/Explanation of Issue

Your PLCD or PTS7 wireless handheld touch screen is only powering on when plugged in via USB or on it's wireless dock. In most cases this is a result of a component failure on the control card and not a result of a bad battery.

Fix/Solution

  1. To prevent rapid battery degradation, run your touch screen while not using the dock or USB cable until the battery is low, power down and let it charge to full before you resume use. 
  2. Contact your favorite ETC dealer to set up an RMA on the unit to have the unit serviced. 
  • Was this article helpful?