Skip to main content
Electronic Theatre Controls Inc

Sensor IQ Breaker Lockout/Tagout

Issue

I need to lockout/Tagout a breaker in my Sensor IQ.

Explanation

To follow proper Electrical Safety it my be required to lockout/tagout a circuit being fed from a Sensor IQ panel.

Solution

ETC recommends the MasterLock 493B or the Brady 120/277v Clamp-On Breaker Lockout (65396). Not all standard lockout devices will fit the Sensor IQ breakers, but ETC has tested this one and it does function properly.

These Breaker locks are not sold by ETC directly. However, they are available from normal industrial suppliers. (e.g. Graybar, Grainger, etc.)

  • Was this article helpful?