Skip to main content
Electronic Theatre Controls Inc

ETC Recommended Network Switch Configuration Guides

This article provides configuration guides for current and past network switches that have been installed as part of ETC lighting systems.  The network switches that are currently shipping are at the top with the oldest shipping switches at the bottom.

24-port Network Switches ordered through ETC will ship configured.  These documents are for reference.  It is recommended to contact ETC Technical Services at 1-800-688-4116 with any questions related to modification of an existing configuration.

Cisco SG350-28P

Below are instructions for configuring an ETC supplied Cisco SG350-28PP Ethernet Network Switch.

ETC Switch Part # SGN1256

ETC Guide Part # 4000M2210 - Cisco SG350-28P Switch

Cisco_SG350_28P_default_ETC_configuration.pdf

Currently Shipping:  ~2018 - Present

Cisco SG300-28PP

Below are instructions for configuring an ETC supplied Cisco SG300-28PP Ethernet Network Switch.

ETC Switch Part # SGN1129

ETC Guide Part # 4000M2203 - Cisco SG300-28PP Switch Configuration

Cisco_SG300-28PP_default_ETC_configuration.pdf

Shipped: ~2014 to ~2018

Dell 3524P

Below are instructions for configuring an ETC supplied Dell 3524P Ethernet Network Switch.

ETC Switch Part # SGN1099

ETC Guide Part # 4000M2202 - Dell 3524P Config Recommended Practice

Dell_3524P_default_ETC_configuration.pdf

Shipped:  ~2008 to ~2014

Linksys SRW224P

Below are instructions for configuring an ETC supplied Linksys SRW224P Ethernet Network Switch.

Linksys SRW224P Setup.pdf

Shipped:  Before ~2008

  • Was this article helpful?