Skip to main content

 

Electronic Theatre Controls Inc

Enabling Or Disabling Data Ports

  • Push the setup button [ ]
  • Scroll down to [Rack] and push [Enter]
  • The Data Ports section is the second from the top so you should see it right away.
  • Scroll down until DMX A: [Enabled] is highlighted.
  • To disable DMX A push [Enter] and change [Enabled] to [Disabled].
  • Do the same for DMX B: [Enabled], which is the next one down.
  • Do the same for sACN: [Enabled], which is the last one.   
  • Was this article helpful?