Enabling Quick Setup Button on CEM3

Explanation

The steps below will walk you through how to Enable/Disable the [Quick Setup] shortcut on the home screen of the CEM3. Quick Setup is used to set up your rack using a minimum amount of data to achieve a basic configuration.

Steps to Solution

1. Push the Setup button.
2. Scroll down to [Rack] and push Enter
3. Scroll down to Setup at Home: 
   1. Press Enter to toggle between [Yes] and [No]
   2. If set to [Yes], the quick setup option will be exposed on the home screen. If set to [No], that option will be hidden from the home screen.