Skip to main content

 

Electronic Theatre Controls Inc

Sensor3 (CEM3) Quick Setup (Typically Used in Touring and Portables)

Easy quick way to set up the CEM3.

  • [Setup] is in the bottom left corner. Scroll down using the scroll pad until [Quick Setup] is highlighted. Push [Enter].
  • if Quick Setup does not appear on the front screen hit [setup] and scroll down through the menu.
  • To select any of the words above, scroll over the words you want and push [Enter] to change it as needed.

Note: Patching for all ports will start with the First Dimmer entered on this screen.

  • After completing the quick setup, continue on to set dimmer module types (in dimmers) and patching (in patching). Both options are under the [Setup].
  • Was this article helpful?