Skip to main content

 

Electronic Theatre Controls Inc

Connect a Sola series fixture to a Hog 4 console via ArtNet or sACN

Explanation

How to connect a High End Systems Sola series fixture to a Hog 4 console via ArtNet or sACN.

Steps to Solution

On the fixture

  1. Select the input
    1. Navigate to Set
    2. Select Input
    3. Choose ArtNet or sACN
  2. Set the universe number and make note of that universe number
    1. Navigate to Set
    2. Navigate to "Set Universe"
    3. Change the universe to your desired universe
  3. Make note of the fixture's IP address

On the Hog 4 console

  1. Launch the show
  2. Change the FixtureNet IP address to be in the same range as the fixture's IP address
  3.  Open the network window
    1. [Setup] -> (Network)
  4. Open the DP 8000 settings
  5. If using ArtNet, in the ArtNet output settings, on the universe, you are patched to adjust the ArtNet Subnet and Universe to correspond to the fixture's universe
  6. If using sACN, in the E1.31 settings, on the universe, you are patched to adjust the sACN universe to correspond to the fixture's universe.
  • Was this article helpful?