Skip to main content


Electronic Theatre Controls Inc

SolaPix 19 Does Not Take Software Upload


The Solapix 19 will not upload the latest software to a replaced board

Description/Explanation of Issue

A new board that has been replaced give you an error when uploading,  "0001H Info

The reason for this error is that the old board had version 13, the new board has version 14.

The software below will change the boot code from Version 13 TO  Version 14



  1. to be able to upload
  2. Refer to the read me files in the software below to assist with the upload.
  3. This will bring the fixture up to current firmware


  • Was this article helpful?